Microlens arrays are typically used for beam homogenization and shaping, and can be paired with anything from high powered LEDS to lasers. We offer square arrays in a standard 10 mm x 10 mm configuration, and can customize for desired lens pitch and focal length. These arrays, often used in pairs, are ideal for fiber coupling, laser ablation, and welding.
Click here to get more.
Our fly’s eye condenser arrays are suitable for situations where one would need a short working distance and large illuminated field. They are often selected for medical laser use, fluorescence microscopy and semiconductor instrumentation. They transform non-uniform light to a uniform irradiance distribution on the illumination plane.
These optical components need no adjustment, and are constructed using a two-dimensional array of dual-surface cylindrical microlenses.
Fiber optics are long, thin strands of pure, high quality glass. When arranged in bundles (optical cables) they can be used to transmit light signals over long distances, allowing data to be processed at the speed of light.
Optical fibers consist of three parts. The core is a thin glass center which transmits light. Surrounding it is the cladding, an outer layer of glass with a higher refractive index which reflects light into the core. This cladding is approximately ten times the diameter of the core. Around both layers is a plastic buffer coating which protects the fiber.
For transmission of laser light, single mode fibers are used. These have small cores, about 8-10 microns in diameter, and transmit light directly down the fiber in transverse mode. Single mode fibers have applications in telephone, Cable TV, and internet signal.
Multi-mode fibers, with cores of 50-100 microns in diameter, are used to transmit infrared light. Multi-mode cables are useful for relaying data over relatively short distances (under 600 meters) but are not efficient for longer distances because of modal dispersion. They are specified with two numbers, their core and cladding diameters. A 62.5/125 μm multi-mode fiber would have a core diameter of 62.5 micrometers and a cladding with 125 micrometer diameter.
Special purpose optical fiber can be constructed with a non-cylindrical core or cladding.
We also carry microspheres, tiny perfectly formed spheres made out of solid grade A fine annealed optical glass. They can be used for relaying images in compact areas, as well as for coupling light into or out of fibers. Since the focal point of each microsphere is close to its surface, placing it against another sphere or microfiber will result in almost complete coupling.
Micro waveplates are used in fiber optics to change the polarization state of the light traveling through it. We can supply micro waveplates with dimensions down to 0.35mm x 0.35mm, with a thickness of 0.19 mm. These micro waveplates are made of crystal quartz and have a surface quality of 20/10 scratch dig.
Shanghai Optics also manufactures high quality micro prisms. These prisms can direct light from one optical channel to another, and are suitable for fiber optic applications or for use as a circulator, interleaver, or MEMs. High reflectivity minimizes signal loss, and the precise engineering of these prisms enable precise deviation.
We produce standard right-angle prisms, dove prisms, and penta prisms in micro sizes, and can also provide custom specialty prisms as needed. Our right angle micro prisms are usually used to reflect image paths or to redirect light at a ninety degree angle. Dove prisms can invert an image, and penta prisms deviate light by 90 degrees without inversion.
Our micro PBS, polarization beamsplitter cubes, are used in fiber optics to split a laser beam into its component beams by polarization. These cubes are the core optical component in polarizers and interleavers. We manufacture micro polarization beamsplitter cubes down to 0.2 mm dimensions.
These micro optical components are subject to the strictest quality checks, and we can guarantee that every micro prism that leaves our factory fully meets all quoted standards.
Our microlens have a wide range of applications, from coupling light to optical fibers, increasing light collection of CCD arrays, and focusing light on active areas of a LCD for a digital projector. They also form the heart of compact imaging devices in photocopiers or smart phone cameras, and are essential to 3D imaging and displays.
Microlens available from Shanghai Optics includes:
These lenses are all precision polished to a very high standard. As for our other micro components, they are subject to a careful quality control and required to meet tight standards.
Using our ad package , you can display your logo, further below your product description, and these will been seen by many photonics professionals.
Find more supplier details at the end of this encyclopedia article , or go to our
Micro-optics (or microoptics) is the field of optics dealing with particularly small optical components. The small physical dimensions have various implications concerning fabrication techniques, usable optical materials, relevant physical effects, performance limitations and the practical handling. The article is meant to provide an overview on such aspects.
Some miniature optical components are essentially fabricated in similar ways as traditional large optical elements. For example, various types of optical lenses, prisms, mirrors, beam splitters, apertures, diffusers, diffraction gratings etc. are made with rather small dimensions of e.g. 2 mm, and may then be considered as micro-optics. (There is no generally agreed dimension limit for this area.) A common application area is in the context of laser diodes, where small beam collimator lenses are required.
On the other hand, particularly optical elements with sub-millimeter dimensions are often made with totally different fabrication techniques. These largely have their origins in fields like microelectronics and optoelectronics, and often involve wafer-based manufacturing. Much of the technology came from the field of optical data transmission. For example, optoelectronic chips may contain microlasers and tiny photodetectors, which creates a need to condition incoming and outgoing optical radiation (light, often including infrared light). Concrete examples are beam collimators for lasers and tiny lenses to obtain an improved and more directional sensitivity of photodetectors, or efficient coupling to fibers.
A common technique for producing microlenses on optoelectronic chips is photoresist reflow. Here, one starts with the deposition of a photoresist material on a typically circular area with a tiny diameter of e.g. some tens of microns. Subsequently, the whole device is heated to a temperature which lets the photoresist melt. Due to the surface tension, it then acquires a well defined lens surface with an approximately spherical curvature.
Many micro-optical components are inseparable parts of larger devices.Note that such a kind of lens is not a separately used optical component, but becomes the inseparable part of some larger devices. That is a typical aspect of micro-optics: most micro-optical elements are not fabricated and sold separately, but rather fabricated as parts of some larger optical microsystems, usually containing multiple components. These can be combined with micro-electromechanical systems (MEMS), leading to micro-optoelectromechanical systems (MOEMS or optical MEMS), which combine optical, electronic and mechanical aspects.
Photoresist reflow is only one of many possible fabrication techniques. There are also various replication techniques, which are partly also used in similar forms for much larger optical elements. Here, one first fabricates a master structure and then uses that for mass production of micro-optical components with techniques like injection molding, hot embossing or UV casting.
Another possibility is microcontact printing, also called soft lithography. It is based on the application of lithography to optically transparent materials. The phenomenon of surface tension can again be used to obtain smoothly curved surfaces.
Where particularly high flexibility is needed, direct laser writing technology can also provide interesting solutions.
Micro-optical elements are often produced in the form of arrays.Many of the applied techniques are particularly suitable for mass production of micro-optical components in the form of large one- or two-dimensional arrays. For example, there are microlens arrays used for the collimation of light from many small light emitters, or for Shack–Hartmann wavefront sensors.
In some cases, a single microlens is applied to some other part, for example to the end of an optical fiber, to a single laser emitter or to a single photodiode. That may be done, for example with specialized laser-based processes.
Partly, micro-optics depends on traditional optical materials such as optical glasses and polymers. However, fabrication techniques as mentioned above often favor other materials, which better fit into that context. Some examples:
Link to optec
The latter example demonstrates that some of these materials would hardly be usable for large optics. Many micro-optical utilize exactly the same foundations of physical optics as are used in large optical components – for example refraction or reflection of light. Here, however, the small dimensions often introduce serious performance limitations via diffraction. That is particularly critical for imaging applications. Being a very basic, unavoidable effect, diffraction rather than optical aberrations due to non-ideal surface shapes then usually set the performance limits. In other cases, however, diffraction is utilized as the basic principle of operation. For example, there are purely diffractive lenses based on relief structures which are reminiscent of Fresnel lenses, but are substantially different from those e.g. in terms of the intrinsically strongly wavelength-dependent focal length. That approach is not usually used in macro-optics. See the article on diffractive optics for more details. Micromirrors essentially work based on the same principles as large mirrors; they usually have a reflective coating which is either metallic or a dielectric multilayer structure. However, they are made with other techniques, such as lithography, and are often combined with certain types of miniature actuators, which allows one to fine-adjust their orientation during operation, or to switch their position. For example, some micromirror arrays are used for miniature displays. As mentioned above, many micro-optical elements are combined with miniature actuators in order to obtain additional functionalities like switching or continuously adjusting optical functions. Although that principle is also used in large optics, e.g. in zoom objectives, it is particularly practical for micro-optics: For testing and the characterization of micro-optics, one needs to apply adapted techniques because the techniques from classical large optics are often not applicable. Often, such techniques need to be custom-developed in conjunction with the used manufacturing system. For example, one requires inspection devices which can subsequently investigate a large number of devices which are made together on a common wafer. Micro-optics are used in a wide range of application fields like telecommunications, lighting, laser technology and biomedical devices. Some typical purposes of the used devices are briefly explained in the following. Microlenses may be used for collimating light from tiny light emitters, and microlens arrays are naturally suited for the application to arrays of emitters. For example, such light emitters can be part of diode bars (one-dimensional arrays of broad-area emitters), VCSEL arrays, or arrays of waveguides on photonic integrated circuits. Similarly, incoming light can be focused with microlenses. That is used for Shack–Hartmann wavefront sensors, as already mentioned above as an application of microlens arrays. Micro-optics may also be used for the tailored correction of the deviation from ideal parameters. For example, certain devices are used for correcting the “smile” of laser diode arrays (diode bars) in order to achieve the maximum radiance (brightness). More complex devices are used for fiber coupling of high-power laser diodes. Very compact displays can be realized based on digital micromirror devices. A DMD chip may contain over a million micromirrors, each of which can be individually addressed by the connected electronics, and is responsible for one pixel of the projection image, or for one color component of one pixel. The control is binary, i.e., a certain image point can only be switched on or off, but effectively one can obtain gray values by rapid switching between on and off, too fast for the human eye to resolve. Micro-optics may also be used for achieving uniform background illumination of liquid crystal displays. Various types of lighting, e.g. with light-emitting diodes (LEDs), can also profit from tailoring the spatial light emission by using micro-optical elements. The optimization of light extraction in white-light (and other) LEDs (which is one of the cornerstones for reaching a high luminous efficacy) may also be regarded as an application of micro-optics. In optical fiber communications, one is often dealing with a large number of data channels. For example, one may use wavelength division multiplexing, where different data channels correspond to optical signal with different center wavelength. On may then need to separate such channels emerging from a single optical fiber in order to extract some of them and inject others before sending the signals into another fiber. For such purposes, micro-optical devices have been developed. They may, for example, involve arrays of movable micromirrors, with one mirror for each channel. Such developments have played in important role in initiating and driving forward the field of micro-optics. For tiny wavelength-tunable lasers, for example made as external-cavity diode lasers, one requires compact tuning elements, as can be realized with micro-optics containing actuators. In other cases, one may need to tune parameters like an optical path length in an interferometer with a movable micromirror, or the transmission of light through a tiny aperture of variable size. Liquid micro-optics, typically in the form of tunable lenses, are increasingly used in such areas. The fabrication, testing and characterization of micro-optics generally needs sophisticated machinery, which often needs to be tailored to the specific devices to be made. The cost for developing, building and operating such machinery is usually rather high. On the other hand, the device throughput can be very high, so that micro-optical elements produced in large quantities can have a rather low cost per device. This has led, for example, to compact displays which are suitable for consumer products, an area with very high cost pressure. One may conclude that micro-optics are particularly suitable for mass products, less for small quantities. In the latter area, however, flexible laser-based fabrication techniques are developed, which may economically work with moderate production volumes. Encyclopedia articles: (Suggest additional literature!) Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest. Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.
Your question or comment:
Spam check: (Please enter the sum of thirteen and three in the form of digits!) By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay. Want more information on custom micro optics? Feel free to contact us.
Principles of Operation
Integration of Micro-optics with Actuators
Characterization of Micro-optics
Typical Applications of Micro-optics
Beam Collimation and Focusing
Displays
Lighting
Data Multiplexing and Switching
Tuning of Parameters
Cost Structure
More to Learn
Bibliography
[1]H. Zappe, “Micro-optics: a micro-tutorial” (containing many useful references), Adv. Opt. Techn. 1, 117 (2012); https://doi.org/10.1515/aot-2012-0016
[2]L. G. Commander, S. E. Day and D. R. Selviah, “Variable focal length microlenses”, Opt. Commun. 177, 157 (2000); https://doi.org/10.1016/S0030-4018(00)00596-4
[3]P. J. Smith et al., “Switchable fiber coupling using variable-focal-length microlenses”, Rev. Sci. Instrum. 72, 3132 (2001); https://doi.org/10.1063/1.1380391
[4]A. Schilling et al., “Efficient beam shaping of linear, high-power diode lasers by use of micro-optics”, Appl. Opt. 40 (32), 5852 (2001); https://doi.org/10.1364/AO.40.005852
[5]T. Krupenkin, S. Yang and P. Mach, “Tunable liquid microlens”, Appl. Phys. Lett. 82 (3), 316 (2003); https://doi.org/10.1063/1.1536033
[6]J. Lee et al., “Imaging quality assessment of multi-modal miniature microscope”, Opt. Express 11 (12), 1436 (2003); https://doi.org/10.1364/OE.11.001436
[7]K.-H. Jeong et al., “Tunable microdoublet lens array”, Opt. Express 12 (11), 2494 (2004); https://doi.org/10.1364/OPEX.12.002494
[8]H. Ren, Y. H. Fan and S. T. Wu, “Liquid-crystal microlens arrays using patterned polymer networks”, Opt. Lett. 29 (14), 1608 (2004); https://doi.org/10.1364/OL.29.001608
[9]W. H. Hsieh and J. H. Chen, “Lens-profile control by electrowetting fabrication technique”, IEEE Photon. Technol. Lett. 17 (3), 606 (2005); https://doi.org/10.1109/LPT.2004.842339
[10]F. Krogmann, W. Mönch and H Zappe, “A MEMS-based variable micro-lens system”, J. Opt. A: Pure Appl. Opt. 8, S330 (2006)
[11]X. Huang et al., “Thermally tunable polymer microlenses”, Appl. Phys. Lett. 92 (25), 251904 (2008); https://doi.org/10.1063/1.2945646
[12]L. Miccio et al., “Tunable liquid microlens arrays in electrode-less configuration and their accurate characterization by interference microscopy”, Opt. Express 17 (4), 2487 (2009); https://doi.org/10.1364/OE.17.002487
[13]F. C. Salgado-Remacha, “Laguerre–Gaussian beam shaping by binary phase plates as illumination sources in micro-optics”, Appl. Opt. 53 (29), 6782 (2014); https://doi.org/10.1364/AO.53.006782
[14]G. Pelegrina-Bonilla and T. Mitra, “Compensation of the laser diode smile by the use of micro-optics”, Appl. Opt. 57 (13), 3329 (2018); https://doi.org/10.1364/AO.57.003329
Questions and Comments from Users