Laser come out from the laser source and it will pass though the scan head and lens or other optical equipment. So the surface of the material will be irradiated by focused laser beam. And the surface contaminants or rust layers be vaporized and peeled off.
You can find more information on our web, so please take a look.
Silver is a chemical element with the symbol Ag. It exhibits the highest electrical conductivity, thermal conductivity, and reflectivity of any metal. Silver is used in solar panels, water filtration, jewellery, ornaments, high-value tableware and utensils.
1. Silver cutting requests high peak power for MOPA fiber laser to achieve higher efficiency. 2. The MOPA fiber laser has stronger resistance for high reflectivity materials cutting , because isolater be setting inside MOPA fiber laser.
Laser Type: YDFLP-100-M7-M Lens: F100 Speed: 500 mm/s Pulse width: 500 ns
CFRP are composite materials that consist of two parts: a matrix and a reinforcement. The matrix is composed of polymer resin, and the Reinforcement is composed of carbon fiber. It is often used in such areas: Aerospace engineering, automotive engineering, sports goods, etc.
Precise heat control is critical during the cutting process, to avoid cutting section charring of the CFRP because of the heat effect.
Laser Type: Seal-355-15S; Lens: F100 Speed: 800 mm/s, Pulse width: 1 us Speed: 300 mm/s, Pulse width: 1us
Gold is a chemical element with the symbol “Au”. In a pure form, it is a bright, slightly reddish yellow, dense, soft, malleable, and ductile metal. Gold is often used in the jewelry industry, electronics, medicine and even cooking.
1. The MOPA fiber laser has stronger resistance for high reflectivity materials cutting , because isolater be setting inside MOPA fiber laser. 2.Gold cutting requests high peak power for MOPA fiber laser to achieve higher efficiency.
Laser Type: YDFLP-100-M7-M Lens: F160 Speed: 500 mm/s Pulse width: 500 ns Time: 6 s
Artificial leather, also called synthetic leather, is a material intended to substitute for leather in upholstery, clothing, footwear etc. It is usually made by a variety of different formulations of PVC and PU foaming or film processing and production.
The performance of cutting section will be more delicate and smooth by UV laser, compared with fiber laser.
Laser Type: Seal-355-5; Lens: F254 Speed: mm/s, Pulse width: 1 us Frequency: 40 kHz
Copper is a chemical element with the symbol “Cu”It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. And copper doesn't easy be cutting because it is high reflectivity materials.
1. The MOPA fiber laser has stronger resistance for high reflectivity materials cutting , because isolater be setting inside MOPA fiber laser.2.Copper cutting requests high peak power for MOPA fiber laser to achieve higher efficiency.
Perovskite P4 laser edge cleaning equipment is specially designed for precision trimming of perovskite solar cell edges. It uses high-energy pulsed laser technology and galvanometer field mirror scanning system to accurately remove battery edge burrs, residual film and conductive layer redundancy, ensure the edge is flat and defect-free, and eliminate leakage hazards. Through non-contact processing and micron-level positioning (accuracy ≤30μm), substrate damage is avoided and the stability of the battery structure is maintained. Integrated intelligent visual positioning and real-time closed-loop control, adapted to high-speed processing of glass/flexible substrates, synchronously optimize edge passivation effects, significantly improve component weather resistance and photoelectric conversion efficiency, help mass production yield break through 95%+, and enable large-scale production of high-efficiency batteries.
As a national high-tech enterprise and Jiangsu Provincial Key Project leader, Microtreat bring cutting-edge innovation to perovskite solar manufacturing. Our dedicated R&D team has pioneered laser precision processing solutions since , supported by tens of millions in angel funding (led by Oriental Fortune) for continuous technological breakthroughs.
1. Yield jump: edge defect removal rate>99%, component weather resistance enhanced.
2. Cost optimization: non-contact process reduces consumables loss, maintenance cost reduced by more than 30%.
3. Flexible production: compatible with special-shaped substrates and customized edge cleaning paths, adaptable to TOPCon/HJT and other stacking processes.
4. Zero learning cost: fully automatic parameter matching, one-click operation, reducing the difficulty of personnel training.
5. Long-term stability: industrial-grade laser life ≥80,000 hours, 7×24 hours of continuous production without attenuation.
6. Customized square flat-top spot: single spot size can be>270um, improving edge cleaning efficiency.
1. Through high-energy laser beam focusing on a spot of several hundred microns, the film layer is cleaned;
2. The size of the processed product is highly compatible and can be customized;
3. The specially designed combined platform effectively reduces the damage of the laser to the platform;
4. The laser can be selected in a variety of powers and customized according to the beat;
5. The spot can be customized, ranging from 50-270um
6. The operation interface is intuitive, and the edge cleaning width can be set in the recipe without drawing
7. The galvanometer plus field mirror scanning system can etch special-shaped patterns
1. Semi-automatic and automatic operation modes can be switched.
2. Customized semi-automatic mode for efficient testing.
3. Advanced machine vision positioning system, equipped with high-precision CCD camera.
Link to Microtreat
4. XY axis high-precision linear motor can perform interpolation movement.
5. Equipped with infrared fiber nanosecond laser, different parameters can be set through software recipes.
6. Make P3.5 protection line, which can effectively reduce the etching heat affected area.
1. CIGS battery edge cleaning
2. Cadmium telluride battery edge cleaning
3. Perovskite single stack battery edge cleaning
4. Suitable for R&D and small batches
5. For other battery materials, please consult our relevant personnel
1. Product size: minimum 10x10mm, maximum 600xmm, support customized size
2. Industrial camera equipped with high-power telecentric lens, CCD positioning accuracy ≤±3μm
3. Rigid glass thickness: 0.7-3.2mm; compatible with flexible
4. X/Y linear motor positioning accuracy ≤±3μm, repeatability ≤±2μm
5. Maximum processing speed of galvanometer scanning: mm/s, edge cleaning speed ≥40mm/s@10mm width
6. Edge cleaning accuracy ≤±20μm
7. Single-sided thermal impact ≤20μm
8. Cleaning width: 2-30mm adjustable
9. File formats that can be processed: standard Gerber files, DXF files, DWG files, etc.
10. Windows 11 control PC, 21.5-inch monitor
11. TeamViewer remote access
12. Installation and training on-site by Microtreat staff
13. Dust is collected by dust collector, exhaust flow: >200m³/h, duct diameter: ￠100mm
14. Compressed air Pressure: 0.5～0.7Mpa, flow rate: <200L/min, compressed air pipe diameter: ￠10mm
15. Marble base and metal welded frame
16. Ground feet with seismic isolation function
17. Dimensions: mmxmmxmm, kg (300x300mm processing platform)
18. Rated power 12KW, average power 7KW
19. 3-color status signal tower
20. UL certification available
21. Equipped with safety sliding door, all door panel positions are installed with Interlock or Sensor
>480V/60Hz
2. Multiple laser powers are available (nm wavelength)
20W output power, 60W output power, 100W output power, 200W output power
3. Contact us to learn about your specific needs
For more laser edge cleaning for solar panelinformation, please contact us. We will provide professional answers.